Coasting Along

This was not my favorite project b/c it was a real pain but the outcome was pretty unique so I thought I would share it.
What you will need (similar to the beer tray project)

• Epoxy Resin
• Castin Craft 3x3 reusable resin mold
• Mold release spray
• Resin mixing cups
• Adhesive felt or cork
• Beer caps, pictures, etc

How to make it -

• Step 1: Spray molds with mold release spray
• Step 2: Pour in thin layer of expoxy resin and let set for about an hour
• Step 3: Place beer caps or photos into mold (if you are using photos you should mod podge them first to make sure they don't bleed)
• Step 4: Let the first layer dry 
• Step 5: Pour in a second layer (I like to make the second layer a different color so I mix the resin with a few drops of Castin Craft dye)
• Step 6: Let it dry for 12+ hours
• Step 7: Pop the coasters out of the mold and you are almost done!
• Last Step: Apply some adhesive cork to the bottom of the coasters
• ENJOY!!

Customized Champagne Flutes

Toss the permanent marker.  Check out this easy, affordable, and cute solution to make sure guests don’t forget which glass is theirs.

• Step 1: Print out some cute patterns (customize for the occasion)
• Step 2: Cut them the same size as the base of the champagne glass
• Step 3: Place 2 small drops of hot glue on the pattern and place glass on top
• Step 4: Have fun at your party!

Note: this will not ruin your glasses.  The paper and glue come right off!